1.2kW 2000 Kg Heavy Duty Sliding Gate Operator Kit Galvanized

1200W 2000 kg Heavy Duty sliding gate operator kit with Luxury accessories

Feature

1. Fully integrated electromechanical system (without rack)

2. Single-button cycle control/three-button control can

Selected

3. Optional shock-resistant infrared photocell control board interface

4. Alarm light interface

5. Automatic delay off

6. Pedestrian mode

7. Adjustable resistance sensitivity

8. The gate will automatically stop and reopen when encountering an obstacle

9. Wireless remote control or wired remote control optional

Complete Kit included:

- 1 x Motor with built in Control Panel

- 4 x Remote Controls

- 2 x Manual clutch Keys

- 1 x Motor mounting base plate

- 1 x Instruction Manual

- 2 x Photocell

- 1 x Flash lamp

- 4 x Gear rack

Our sliding door motor has many advantages. Its dust cover can effectively block rainwater, insects and dust, which can greatly increase the service life of the motor.automation for sliding gate 2000kg, residential use sliding gates opener,sliding gate opener accessories,ac motor sliding gate operator remote control sliding door opener,ac sliding gate operator

Using pure copper core, the resistance is small and the performance is strong. All raw materials are strictly controlled and kept improving to ensure the efficient operation of the motor.

sliding gate motor FAQ:

Communication with customers:

1 The motor runs but the sliding gate operator doesn't work.

A: Check whether the clutch is closed.

2 The power indicator light doesn't flash and the key doesn't

react.

A: Check whether power is connected right.

B: Check whether the fusel is burned, it yes, please exchange it.

3 The opening and closing limit can not work.

A: Check whether the limit adjustment switch is installed right.

B: Check whether the limit iron is installed right. Adjust the

position of the limit iron.

4 Crash proof is not effective.

A: Check whether the connection of crash proof is correct.

B: Check whether the photocell is installed right.

C: Check whether the connection of the wire of the loop

detector is right .

5 When the gate just close up, it turns to open.

A: Check whether the voltage is normal.

B: If the crash proof equipment is installed, please check

whether it works well.

6 The remote control doesn't work

A: Check whether the battery is low. If yes, change it.

B: Check whether the code of the remote control is the same

with the code of the control panel.

1.2kW Automatic Gate Opener Kit

1200W Sliding Gate Operator Kit

Automatic Gate Opener Kit Galvanized

1.2kW 2000 Kg Heavy Duty Sliding Gate Operator Kit Galvanized Images